TīmeklisD350PL(A) accessory current loads @ 24 VDC: RA400Z(A): 0 mA standby, 10 mA maximum in alarm. RTS451(A) and RTS451KEY(A): 0 mA standby, 7.5 mA maximum in alarm. FOR D350RPL(A) Operating voltage range: 20 to 30 VDC, 24 VAC/VDC, 120/ 240 VAC auxiliary power (requires a separate auxiliary source). Standby current: 300 …
System Sensor Model RA400Z Remote LED Annunciator X8
TīmeklisNOTE: RA100Z and RA100ZA replaces RA400Z and RA400ZA . GENERAL INFORMATION The National Fire Protection Association has published codes, … TīmeklisRA400Z Datasheet Plug-in 190째F Thermal Detector - Systemsensor advanced ideas. Duct Smoke Detector Accessories, Gamewell-FCI by Honeywell RA400ZA go syscall.flock
Duct Smoke Detector Intelligent Non-Relay Photoelectric Duct …
TīmeklisThe tab on the back of the RA400Z and RA400ZA must be broken off for use with most System Sensor intelligent systems. (See Note 1 and Figure 4.) After tab is broken, the input voltage for the RA400Z and RA400ZA is limited to 18 volts minimum. H0355-00 Specifications Voltage Range Conventional System: 3.1 to 32 VDC — Do not break tab. Tīmeklisoptional Model RA400Z Remote Annunciator to be connected. Mounting: Each 2100TR detector is supplied with a mounting bracket that permits the detector to be mounted to: • Standard single-gang box. • 3-1/2" (88.9 mm) or 4” (101.6 mm) octagonal box directly. • 4" (101.6 mm) square electrical box using a plaster ring. Specifications for 2100TR TīmeklisNOTICE: This manual shall be left with the owner/user of this equipment. I56-2967-006R. NOTE: The D4120 duct detector consists of D4P120 Power Board component and the D4S Sensor component. SPECIFICATIONS. Operating Temperature: D4120 & D4S: –4° to 158° F (–20° to 70° C) D4P120: –40° to 158° F (–40° to 70° C) Storage … go syntax error: unexpected : expecting